WiseTerm Owl
Contents
 Introduction
 Connecting
 Dialing
 Serial Comms
 FAQ
 Screen-shots
Menus
 File
 Telnet
 Dial
 FTP
 Window
 Help
 Toolbar
Settings
 Communications
 Display
 Attributes
 Features
 Colours
 Keyboard
 Miscellaneous
Modem Port
 Aux. Port
Other
 Fonts
 Paste Buffers
 Telnet Connect
 Serial Connect
 Local Commands
 Command line
 Notes
 Emulation
 Registration
 Changes
 Licence
 Search

Valid HTML 4.01!
[Created with Vim]
[Python Powered]
Settings - Modem Port Search  Prev Next 

Settings - Modem

Port COM1-COMN Selects COM port to act as the Host. Automatically detects maximum available port number.
Baud Rate 256000* Sets the baud-rate.
128000**the baud-rate may not be supported.
115200
57600
56000
38400
19200
14400
9600
4800
2400
1200
600
300
150
110
Data Bits 7 Sets the number of data bits.
8
Parity None Sets the parity.
Odd
Even
Mark
Space
Stop Bits 1 Sets the stop bits.
1.5
2
Tx Timeout Integer Sets the TX timeout in seconds.
Tx Pacing Integer Sets an inter-character delay in characters per second. Disabled when set to 0. Should only be used when hardware-handshaking doesn't resolve dropped character issues.
DSR On/Off If On, TX output will stop if DSR is inactive. If Off, DSR will be ignored.
CTS On/Off If On, TX output will stop if CTS is inactive. If Off, CTS will be ignored.
XON/XOFF On/Off If On, TX output will stop if XOFF is received, and restart when XON is received. If Off, XON and XOFF characters will be passed through.
DTR On/Off If On, when the RX buffer high-water mark is reached, DTR will become inactive. If Off, DTR will be asserted when the serial port is open.
RTS On/Off If On, when the RX buffer high-water mark is reached, RTS will become inactive. If Off, RTS will be asserted when the serial port is open.
XON/XOFF On/Off If On, when the RX buffer high-water mark is reached, an XOFF character will be sent. When the RX buffer low-water mark is reached, an XON character will be sent. If Off, no XON/XOFF characters are sent.


  Top Prev Next